How to Plant Cannabis Seeds Indoors
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 11 testimonials and 93% of readers who voted found it helpful, earning it our reader-approved status.
This article has been viewed 1,322,363 times.
Growing cannabis at home can be a fun project and a nice way to have your own cannabis plants on hand. You may want to grow cannabis indoors due to inclement weather in your area or due to a lack of green space in your yard. Start by germinating the seeds. Then, plant the seeds in soil or in a starter cube. Once the seeds have been planted, care for them properly so they grow and thrive.
- After 12 hours, place the viable seeds on a towel.
Wet one paper towel and put it on a plate. Paper towels are thick enough to retain the moisture needed to help the seeds germinate. Place one paper towel under running water until it is wet to the touch, but not dripping wet. Use a ceramic dish or plate, as it will be strong enough to hold the towels and the seeds. The paper towel should cover the dish or plate.  X Research source
- If you do not have enough space on one plate for all your seeds, soak two more paper towels and put the remainder on a new plate covered in a wet paper towel.
Wet other paper towel and place it over the seeds. Make sure the wet towel makes contact with the seeds.  X Research source
- You can try using a heat lamp near the seeds to keep them warm. Do not warm the seeds up too much, as you do not want your heat source to dry out the paper towels.
- If the seeds become too dry, they could die and never germinate.
- Be very careful with the seeds as they open. Avoid prodding, pulling, or touching the seeds, as you do not want to damage the roots.
- Any seeds that have not opened and grown roots within a few days should be discarded, as they are not viable.
- As an alternative to soil, you can use starter cubes from your local nursery or online. Starter cubes are pre-cut growing pods made of composted bark. They contain a hole where you can place the cannabis seeds and grow them in good conditions. Basic starter cubes are inexpensive and easy to use.  X Research source
- If you make planting holes that are too shallow, the seed’s roots will not have enough soil to grow well. If you make the planting holes too deep, the seed will have a difficult time sprouting.
- Do not pull or tug at the seeds when you pick them up with tweezers. If they are stuck to the paper towel, wet the towel with water to make the seeds easier to pick up.
- Do not press hard on the seeds when you cover them, as this can disturb their growth.
- If you are using starter cubes, pinch the top of the holes in the cubes closed.
- Maintain a growing temperature of 75 to 85 °F (24 to 29 °C) for the plants so they thrive.
- Stick to a regular watering schedule so the plants get enough moisture. You can plan to spray the plants in the morning and then again at night so they get the water they need.
- Grow lights range from $200 to $1,200 USD depending on the size and model.
- You can get cool white grow lights at your local hardware store or online.
Avoid touching or handling the seeds as they grow. Touching or handling the seeds can damage them and stunt their growth. With the right growing conditions and care, your seeds should sprout and poke out of the soil within five to ten days.  X Research source
More than 12 hours of light a day for about 4-6 weeks as the plant matures will be enough. Once the plant is a decent size, you may induce flowering. Switch the plant to a timer of EXACTLY 12 hours of strong light (the more sunlight the plant gets, the more energy it can devote to flowering).
Yes, it is bad for the plant to have water constantly sitting at the bottom of the pot. It could make the roots rot over time.
You can actually find LED lamps made for growing plants online. If you don’t want to bother with that, you can just get a purple light to grow them under. There are many articles online talking about the effects of colored lights on plants.
If you plan on growing short, fat plants, they should be at least 6′ apart. You don’t want the plants rubbing on each other or shading the other plants. You will also want to select a spot to ensure all plants will receive maximum sunlight.
You can start as soon as you see two little leaves budding. During that time, make sure to use distilled water when watering them.
Cannabis thrives in a comfortable room temperature when grown indoors, or a little warmer – not too dry, not too humid. If it feels too hot or too cold for you, it’s probably too hot or too cold for your cannabis plants.
You can’t. You can try keeping it by a window, but you still won’t have much success. Lights aren’t that expensive, look on Amazon.
Yes, rain water is fine for any plant. The use of distilled water is to keep from adding tap water contaminants.
Keeping the plant from “stretching” is simple. Place the lights closer to the top of the plants. There are good video examples on YouTube showing two seeds started at the same time and placed under lights at different heights. The plant with inadequate lighting actually “reaches” for the light, growing tall and thin with longer internodal gaps. The seedling with closer light grows short and squat, with less stem between leaves (internodal distance), which means a better frame and plant structure for supporting the massive buds that you want to grow. As the plant grows, raise the lights with it. (Most folks suggest somewhere in the 16-30 inch range from source to canopy.)
The cultivation of cannabis is considered illegal in many jurisdictions. Make sure it is legal to grow cannabis in your area.
You Might Also Like
A Complete Guide to Growing Autoflowers Outdoors (When to Plant, How Often to Water, & How Much They Yield)
About This Article
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 1,322,363 times.
To plant cannabis seeds indoors, first soak the seeds in lukewarm tap water for 12 hours. Discard any seeds that float to the top. Then, place the seeds on a damp paper towel on a plate with 1 inch (2.5 cm) of space between each seed. Cover the seeds with another damp paper towel. Keep the seeds in a spot that remains between 70-80°F (21-27°C), and spray the paper towels with water whenever they start to dry out. The seeds will sprout in 2-3 days. When they do, fill pots or a growing tray 3/4 of the way with loose potting soil that has a pH between 5.8 and 6.3. Press the soil down lightly, leaving some air in it. Then, use a pencil to poke 1 inch (2.5 cm) holes in the soil. Place the sprouted seeds vertically in the holes and fill the holes with potting soil. Water the soil thoroughly and place the pots or tray in a spot that’s always 75°F (24°C) or warmer. Set up a grow light over the seeds and leave it on at all times. Water the seeds every day so the soil doesn’t dry out. The seedlings will emerge in 2-4 weeks. To learn how to use cool white grow lights to help your cannabis seeds grow, keep reading!
Reader Success Stories
Terrie Mac morrison
Did this article help you?
Terrie Mac morrison
“The process is explained very easily, and the author took note in detailing every aspect of seed planting. As for the rest of the process, refer growing weed indoors and harvesting marijuana plants.” . ” more
“Thank you for your insight. I’m looking to cultivate cannabis, and your recommendations and Q&A answer some of my questions on starting to plan my grow.” . ” more
“Although I have grown cannabis, for a couple of years I found some good tips in this article. I always find the starting stage to be challenging.” . ” more
How to Grow Marijuana from Seed
If you’re in a location where cannabis (another term for marijuana; short for the plant cannabis sativa) is illegal, growing it is probably illegal too. Bringing in seeds or cuttings to your location can very well be a felony, and reputable sellers won’t ship to you.
You can probably purchase and grow hemp seeds and plants, which have a negligible amount of THC, but these plants won’t produce the psychoactive effects of plants that contain higher levels of THC. Check with your seller to be certain you’re getting what you think you’re purchasing. If you buy seeds for CBD-only hemp plants by mistake, you can end up being very disappointed post-harvest.
How to acquire seeds or cuttings
You can usually find cannabis seeds for sale at most dispensaries in areas where growing cannabis for personal use is legal. You may also find growers who sell cuttings/clones. You can expect to pay $50 to $100 for a pack of ten seeds. When shopping for seeds or cuttings, read the labels and any other information the manufacturer provides on its website or in its catalog to make sure you’re getting the right seeds or cuttings (the strain) for the plants you want to grow.
One way to get your mitts on some seeds is to collect seeds when you find them in flowers you purchased, or get some from friends if they’re collecting.
- Feminized seeds: Nearly all seeds sold by reputable companies are feminized, but make sure they are. These seeds are specially treated to grow into female plants.
- Auto-flowering or photoperiod: Auto-flowering plants are easier, because they enter the flower stage after a certain number of weeks regardless of the light/dark cycle. If you’re a beginner, seriously consider going with auto-flowering plants.
- Genetic background: If seeds are from a well-established strain, such as O.G. Kush, Bubble Gum, or a cross-breed, the genetic background should be stated.
- Blend: The blend represents the percentage of the three species — sativa, indica, and ruderalis. All auto-flower strains contain some percentage of ruderalis, which is responsible for the auto-flowering nature of the plant.
- Yield indoors: The number of grams of bud per square meter of plant when grown indoors.
- Yield outdoors: The number of grams of bud per plant (after drying) when grown outdoors.
- Plant height indoors: Shorter than when grown outdoors.
- Plant height outdoors: Taller than when grown indoors.
- Time to harvest: Approximate number of weeks after germination the flower should be ready to harvest.
- Potency: Percentages of CBD and THC.
- Effect: The type of experience you can expect when consuming product from the plant.
Know the laws about buying cannabis
- In some European countries, laws prohibit growing cannabis, but seed is legal, which is quite confusing. You’re allowed to buy and eat cannabis seeds because they’re non-psychotropic, but you can’t buy them to grow cannabis. Other countries in Europe, such as Germany, have their own seed laws.
- In Canada, where cannabis is federally legal, seeds can be shipped across provincial lines.
- In the U.S., in some states in which cannabis is legal, you can purchase seeds from some dispensaries or other locations to grow plants as long as you keep them in the state. Other states may bar selling to non-licensed growers. Shipping or transporting seeds across state or international borders is illegal, although a few reputable online seed stores ship to individuals with success.
Cuttings are typically treated in a similar manner as seeds in legalized locations. They may be available from some dispensaries or outlets for pick up or delivery with a fee. They’re prohibited from crossing U.S. state lines or international borders. You can buy individual plants and mix and match strains. Prices vary and are often determined by plant size.
Buy cuttings (clones) only from a reputable source who understands proper back-crossing of strains for stability. Back-crossing involves pollinating a plant with one of its parent plants to promote sexual stability, so that when you have a female it won’t hermaphrodite into a male during flowering.
Both seeds and clones are often able to be purchased from commercial locations already in your state.
In the U.S., transporting any part of the cannabis plant over state lines is illegal. This applies to seeds and clones and, technically, even to tissue samples.
How to germinate cannabis seeds
Germinating seeds requires a dark environment that is around 70 degrees. There are many ways to germinate seeds (in soil, in a wet paper towel, in starter plugs) You can also sow them directly into soil in a garden or container, as long as the soil is light and fluffy, so the roots can easily grow down and the stalk can break through the soil. Plant the seeds about 1/4- to 1/2-inch deep and cover them loosely with soil.
Most importantly, seeds need a moist environment; they won’t germinate if they get too dry. You can use a heat mat to increase the success of germination in colder climates.
How to transplant marijuana plants
When transplanting any plant, whether it started from seed or a clone, handle it gently, being very careful not to damage the roots. Center the plant in the pot, and plant it deep enough to cover the root ball completely in soil. If the plant is root bound, you can gently tease the roots apart to encourage outward growth.
Pack your soil or other grow medium down around the roots well enough to support the plant while new roots grow, but not so tight that the soil restricts outward root growth. Water the soil around the roots.
About This Article
This article is from the book:
About the book authors:
Kim Ronkin Casey has been a communications professional for more than 20 years and recently took a year-long leap into the world of cannabis as the communications manager for one of the leading dispensaries in North America. She now consults for companies in the industry on internal and external communications. Joe Kraynak is a professional writer who has contributed to numerous For Dummies books.
Cannabis seeds 101: How to grow marijuana from seed
Cannabis is grown from one of two sources: a seed or a clone. Seeds carry genetic information from two parent plants and can express many different combinations of traits: some from the mother, some from the father, and some traits from both.
In commercial cannabis production, generally, growers will plant many seeds of one strain and choose the best plant. They will then take clones from that individual plant, which allows for consistent genetics for mass production.
If cannabis is legal in your state, you can buy seeds or clones from a local dispensary, or online through various seed banks.
Cannabis seeds vs. clones
For the typical homegrower, it may be easier to obtain cannabis seeds rather than clones. Growing from seed can produce a stronger plant with more solid genetics.
Plants grown from seed can be more hearty as young plants when compared to clones, mainly because seeds have a strong taproot. You can plant seeds directly into an outdoor garden in early spring, even in cool, wet climates.
If growing outside, some growers prefer to germinate seeds inside because they are delicate in the beginning stages of growth. Indoors, you can give weed seedlings supplemental light to help them along, and then transplant them outside when big enough.
Most seeds that you will buy are regular seeds as described above, but here are a couple more types.
How weed seeds work
Cannabis can be either male or female—also called “dioecious”—but only females produce the buds we all know and love. For reproduction, males have pollen sacs and pollinate females, causing female flowers to produce seeds.
Once cannabis seeds are mature, the female plant begins to die, and seeds are either dropped to the ground where they grow into new cannabis plants next spring, or the seeds are harvested for processing into seed oil or food products, or stored so they can be sown in the ground later and become the next generation of plants.
To get the buds found in medical and recreational stores, female cannabis plants are grown in an environment without males—or the males are removed from the area before they release pollen—so the females don’t create seeds. Females can then focus their energies on producing buds and not seeds—this high-potency marijuana is traditionally known as “sinsemilla,” meaning “seedless.”
Some varieties of cannabis can produce male parts alongside female flowers on the same plant, especially if exposed to environmental stressors. These plants are known as hermaphrodites, and sometimes they can self-pollinate to create seeds.
Pros and cons of using cannabis seeds
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
If buying from a reputable breeder or seed bank, growing from seed is the best way to ensure your plants will have solid genetics and start clean, meaning they won’t come with diseases or pests.
Also, buying from a reputable breeder or seed bank will give you a sense of what a particular strain will look and smell like, how it will grow, and how much it will yield at harvest.
The main drawback to growing from seed is there is no guarantee as to what you’ll end up with—if you buy a regular pack of cannabis seeds, it will be a mix of males and females. You’ll need to sex them out (more below) to identify the males and get rid of them, because you don’t want your females producing seeds.
Sexing marijuana plants can be a time-consuming process, and if you don’t catch males, there is a risk that even one males can pollinate your entire crop, causing all of your female weed plants to produce seeds.
One way to avoid sexing plants is to buy feminized seeds (more below), which ensures every seed you plant will be a bud-producing female.
You can also minimize headaches and avoid the hassle of seed germination and sexing plants by starting with clones.
How weed clones work
Aside from producing cannabis through seeds, or sexual reproduction, you can also reproduce the plant through cloning, or asexual reproduction. A clone is a cutting that is genetically identical to the plant it was taken from—that plant is known as the “mother.”
Pros and cons of using cannabis clones
Through cloning, you can create a new harvest with exact replicas of your favorite plant. Because genetics are identical, a clone will give you a plant with the same characteristics as the mother, such as flavor, cannabinoid profile, yield, grow time, etc. So if you come across a specific strain or phenotype you really like, you might want to clone it to reproduce more buds that have the same effects and characteristics.
With cloning, you don’t have to get new seeds every time you want to grow another plant—you just take a cutting of the old plant—and you don’t have to germinate seeds or sex them out and get rid of the males.
One drawback of clones is they need to be taken during the vegetative stage of a plant—flower is too late—so if you have a small setup with only one light, it can be hard to keep clones alive while flowering other plants, because the two need different amounts of light.
Another drawback to clones is they can take on negative traits from the mother plant as well. If the mother has a disease, attracts pests, or grows weak branches, its clones will probably have the same issues.
Additionally, every long-time grower will tell you that clones degrade over time.
What are feminized cannabis seeds?
Feminized cannabis seeds will produce only female plants for getting buds, so there is no need to remove males or worry about female plants getting pollinated. Feminized seeds are produced by causing the monoecious condition in a female cannabis plant—the resulting seeds are nearly identical to the self-pollinated female parent, as only one set of genes is present.
This is sometimes referred to as “cloning by seed” and will not produce any male plants. This is achieved through several methods:
- By spraying the plant with a solution of colloidal silver, a liquid containing tiny particles of silver
- Through a method known as rodelization, in which a female plant pushed past maturity can pollinate another female
- Spraying seeds with gibberellic acid, a hormone that triggers germination (this is much less common)
Most experienced or commercial growers will not use feminized seeds because they only contain one set of genes, and these should never be used for breeding purposes. However, a lot of beginning growers start with feminized seeds because they eliminate the worry of having to deal with male plants.
Top feminized cannabis strain families
A lot of classic weed strains that have been around for a while come in feminized form. Some popular fem seeds are:
- OG Kush
- GSC (Cookies)
What are autoflowering cannabis seeds?
Autoflowering seeds are also popular with beginning growers. They are easy to grow because you don’t have to worry about light cycles and how much light a plant receives.
Most cannabis plants begin flowering when the amount of light they receive on a daily basis reduces. Outdoors, this happens when the sun starts setting earlier in the day as the season turns from summer to autumn. Indoor growers can control when a plant flowers by reducing the daily amount of light plants receive from 18 hours to 12 hours.
However, a type of cannabis called Cannabis ruderalis, which developed in extreme northern conditions without much sunlight, will begin flowering once the plant reaches a certain age—they automatically start flowering regardless of the amount of light they receive, hence the name “autoflower.”
Pros and cons of growing autoflower
Because they grow and flower quicker, growers can fit in multiple autoflower cannabis harvests into the span of one regular harvest.
Autoflowers can be started in early spring and will flower during the longest days of summer, taking advantage of high quality light to get bigger yields. Or, if you get a late start in the growing season, you can start autoflowers in May or June and harvest in the fall.
Also, autoflower plants are small—perfect for closet grows or any small grow, or growing outdoors where you don’t want your neighbors to see what you’re up to.
A couple big drawbacks, though: Autoflower strains are known for being less potent. Also, because they are small in stature, they usually don’t produce big yields.
However, potency in autoflowering varieties has increased significantly since their initial introduction, with some breeders crossbreeding the low-THC ruderalis with other more potent varieties.
Tips for growing autoflower marijuana seeds
Autoflowering strains require some preparation, as they will grow quickly and start to flower whether or not you’re ready for them.
Many marijuana growers start autoflowers early in the season, and at a different time than a regular crop, so keep the season and climate in mind when growing and harvesting—your plants still need warmth to grow, and rain can give them bud rot. Consider growing in a greenhouse to protect them.
Because training happens during vegetative growth, for autoflowering plants, this period could be as short as a few weeks, which means time is limited. Try topping your autoflowers after they have three nodes, and stop once they begin to flower. You will want to prune them lightly.
Go easy on nutrients
Autoflowers don’t need lots of nutrients because they’re small and don’t spend much time in the vegetative cycle. They won’t need as much veg nutrients—such as nitrogen—but will need more bloom nutrients.
What are high-CBD cannabis seeds?
CBD, or cannabidiol, is one of the chemical components—known collectively as cannabinoids—found in the cannabis plant. Over the years, humans have selected plants for high-THC content, making cannabis with high levels of CBD rare. The genetic pathways through which THC is synthesized by the plant are different than those for CBD production.
Cannabis used for hemp production has been selected for other traits, including a low THC content, so as to comply with the 2018 Farm Bill. Consequently, many varieties of hemp produce significant quantities of CBD.
As interest in CBD as a medicine has grown, many breeders have crossed high-CBD hemp with cannabis. These strains have little or no THC, 1:1 ratios of THC and CBD, or some have a high-THC content along with significant amounts of CBD (3% or more).
Seeds for these varieties are now widely available online and through dispensaries. It should be noted, however, that any plant grown from these seeds is not guaranteed to produce high levels of CBD, as it takes many years to create a seed line that produces consistent results. A grower looking to produce cannabis with a certain THC to CBD ratio will need to grow from a tested and proven clone or seed.
How to germinate marijuana seeds
Germination is the process in which a seed sprouts and begins to grow into a new plant. Also referred to as “popping,” germination is the very first step in starting your weed grow.
Marijuana seeds can be acquired from an array of sources and can vary in quality. For more info on how to buy marijuana seeds, check out our Guide to buying cannabis seeds.
Cannabis seeds require three things to germinate: water, heat, and air. There are many methods to germinate seeds, but for the most common and simplest method, you will need:
- Two clean plates
- Four paper towels
- Distilled water
Take four sheets of paper towels and soak them with distilled water. The towels should be soaked but shouldn’t have excess water running off.
Take two of the paper towels and place them on a plate. Then, place the marijuana seeds at least an inch apart from each other and cover them with the remaining two water-soaked paper towels.
To create a dark, protected space, take another plate and flip it over to cover the seeds, like a dome.
Make sure the area the seeds are in is warm, somewhere between 70-85°F.
After completing these steps, it’s time to wait. Check the paper towels once a day to make sure they’re still saturated, and if they are losing moisture, apply more water to keep the seeds happy.
Some seeds germinate very rapidly while others can take a while, but generally, seeds should germinate in 3-10 days. If it’s been two weeks and a seed hasn’t sprouted, it’s probably a dud and won’t sprout.
A seed has germinated once the seed splits and a single sprout appears. The sprout is the taproot, which will become the main stem of the plant, and seeing it is a sign of successful germination.
It’s important to keep the delicate seed sterile, so don’t touch the seed or taproot as it begins to split.
Transplanting germinated cannabis seeds
Once you see the taproot, it’s time to transfer your germinated seed into its growing medium, such as soil.
- Fill a 4-inch or one-gallon pot with loose, airy potting soil
- Water the soil before you put the seed in; it should be wet but not drenched
- Poke a hole in the soil with a pen or pencil—the rule of thumb is: make the hole twice as deep as the seed is wide
- Using a pair of tweezers, gently place the seed in the hole with the taproot facing down
- Lightly cover it with soil
Keep a close eye on the temperature and moisture level of the soil to keep the seed happy. It’s very delicate at this stage. Use a spray bottle to water it—over-watering can suffocate and kill the delicate sprout.
Within a week or so you should see a seedling begin to grow from the soil.
Germinating cannabis seeds doesn’t always go as planned. Some seeds will be duds. Others will be slow and take longer to sprout. But some will pop quickly and grow rapidly.
This is the beauty of seeds—often, you can tell which plants or genetics will thrive right from the get-go. This will help you determine which plants you want to take cuttings from for clones or for breeding if you want to create a seed bank of your own.
How to sex a pot plant
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
As we’ve mentioned, cannabis is a dioecious plant, meaning male and female reproductive organs appear on different plants.
Because only female cannabis plants produce buds and you want them to focus all their energy on producing buds and not seeds, it’s important to identify and get rid of male weed plants so they don’t pollinate females. If females are pollinated, it will give you buds filled with seeds, making your weed harsh and unpleasant.
Cultivating males is important for breeders trying to cross new strains and genetics, but most people growing for buds will want to remove the males.
As mentioned above, you can skip the processing of sexing weed plants by growing with feminized seeds or clones.
If growing male and female cannabis seeds, they’ll start to show their sex organs, or “pre-flowers,” after 8-10 weeks from germination.
Cannabis plant sex organs appear on nodes, the points where branches grow off from the main stalk.
Males will have round balls—these will develop into pollen sacs, which will release pollen into the air when mature.
Females will have a round structure with long hairs—these hairs will develop into pistils, which will catch pollen in the air.
Pre-flowers can initially be extremely small and hard to identify with the naked eye, but you can use a magnifying glass to get a better look.
Can I grow a seed I found in a bag of weed?
Finding a cannabis seed in your stash is not ideal, but we’ve all been there before. Although much less common than it once was, it still happens. Sometimes you’ll notice one when grinding down some flower, or you’ll see one pop, spark, and crackle from the heat of a lit bowl.
These are referred to as “bagseeds” and whether or not you can grow one will depend on where it came from.
Is a bagseed good or bad?
Seeds found in finished cannabis buds can develop for a number of reasons. For example, a male plant may have accidentally pollinated a flowering female during the growing process. But more commonly, they’re a sign of stress and can be attributed to high temperatures during the final stages of flowering or an exaggerated spike in climate or environment.
Seeds can also form in plants with genetic disorders or instability, like hermaphrodites—plants that develop both male and female reproductive parts. Generally, stress and genetic disorders are viewed as bad, so temper expectations with any plant you start from a bagseed.
But sometimes you get lucky and find a mature seed in some really nice herb. Strains like the legendary Chemdog wouldn’t be possible without adventurous smokers planting and proliferating the seeds they found in a bag of kind bud.
So don’t discount bud because it has a seed or two in it. While not ideal, it could be the origins of the next great weed strain.
Ask yourself a few questions to decide if it’s worth the time and energy to grow the seed.
Was the seed found in good weed?
If you don’t like the flavor, effects, or even the look of the bud, then it’s probably not worth growing.
Are you ready to grow?
Growing marijuana takes a certain level of commitment: time, energy, and financial resources, so be sure you can commit to the whole process.
Is the seed viable?
For a seed to be viable, it must be mature enough to have a completely formed genetic blueprint, and it must be strong enough to germinate and pop through its hard casing and sprout its crucial taproot.
There are a few indicators that will give you a sense of whether the seed is worth germinating.
- Tiger stripes—dark stripes on the seed which resemble veins on a leaf are generally good
- Solid shell—a seed should be able to withstand a little pressure when pinched between your fingers; if it crumbles or cracks, it’s no good
Immature seeds tend to be light in color and have a soft outer shell.
In some cases, even if a seed isn’t completely mature, there’s still a chance it could be viable. But often these are extremely weak, take long to develop, and express other unfavorable characteristics. Growers usually discard weak plants to free up space.
You might also find a mature seed that has been physically damaged through poor handling, like rough trimming. In those cases, it probably isn’t worth the effort to try and germinate the seed.
But if the seed you found looks decent, you might as well germinate it and see what sprouts.
Time to germinate
Viable or not, there’s only one sure way to find out if a bagseed will grow. If you’re simply curious to learn and not as concerned with the overall outcome, you can plant a couple of bagseeds outside and see what happens.
If you’re ready for a more serious approach, make sure you have the space for a proper garden and pop the seeds to see what fruit they bear.
Even if your seed sprouts fast and grows vigorously, it still has roughly a 50/50 chance of being female and producing buds, instead of turning out to be a male.
Remember, once a seed germinates, the real work begins. Sexing, selecting, vegetative growth, flowering, and the eventual harvest all lie ahead.
How to buy cannabis seeds
Cannabis seeds can be found on numerous online seed banks, but note that it is illegal to bring seeds into the US and Customs will seize any cannabis seeds that they find in packages or on a person. In legal and medical states, you may purchase seeds at a dispensary.