Posted on

Best way to crack cannabis seeds

Cannabis Seed Cracking Without a Cracker Tool

If you crack weed seeds just before germination, it may help them sprout

Sometimes, marijuana seeds are too weak or too old to sprout quickly, so you need to use some techniques to help them germinate. In this post, I will describe just one method – cannabis seed cracking.

The idea is that cracking requires some energy from an embryo and not all of them are strong enough for that. If you do this job for them, you help your seeds save energy and germinate faster. Besides, the process of germination requires some water to penetrate the shell, and if the seeds are old or haven’t been stored properly, their shell can get too dry to let water inside. The downside to this method is that you can damage the embryo if you squeeze the seed too hard.

Cannabis Seed Cracker: Is It Really Necessary?

I’ve come across a forum thread where people discuss buying a special cannabis seed cracker tool. I even watched a video where a weed grower uses it for seed cracking. You may google this gadget and spend a couple of dozens of dollars on it. But in my opinion there’s nothing special about a seed cracker. It’s just a simple contraption to hold a seed in place and gently apply pressure on it until the shell gives way with an audible crack. The cracking is done one seed at a time.

The good news is that you can do the same with your teeth just as easily!

Just firmly hold the seed with your finger tips, with the ridge positioned vertically and the pointy end facing outward. Gently bite on it with your teeth until you hear it crack. Then use your favorite germination method.

Cracked vs Uncracked

In my little experiment, I used 4 seeds of my OG Kush Auto that I’ve created myself. For some reason or other (because these feminized seeds were made by self-pollination maybe?), these beans are not very quick, especially if the room temperature is low, like it is now – 65-68 °F (18-20 °C). Let’s see if cracking makes any difference.

I’ve just placed 4 pot seeds between wet cotton disks.

After 36 hours, 2/2 of the cracked seeds and 1/2 of the uncracked (the one on the left) have shown tap roots.

After 60 hours, the situation has changed in favor of unckracked seeds. A least, the one in the bottom-right corner seems to be the winner.

72 hours (3 days) have passed, and the last seed to crack is also the strongest. The seeds that were cracked have crooked and somehow yellowish tap roots.

What Has My Cracking Experiment Demonstrated?

It is true that when you crack your marijuana seeds before germinating them, they may show tap roots earlier. However, the first one out of the gate isn’t necessarily the winner. Out of four seeds that I germinated I would definetely choose the one that was the last to crack. So, if you have a good fresh batch of seeds, don’t risk damaging them by cracking their shells. If the seeds are too old or haven’t been stored properly and wouldn’t germinate in a regular way, cracking may help.

Fail-Proof Cannabis Germination Method in Soil or Coco

We have a cannabis seedling germination page that includes everything you need to know about all the different germination methods, but this tutorial is different. In this tutorial, I’m going to share exactly how I do my seeds from beginning to end. Just follow these instructions and you’ll end up with healthy, fast-growing plants that germinate in just a few days. It’s basically fail-proof.

Turn your cannabis seeds…

This step-by-step tutorial will teach you how to germinate seeds and provide basic seedling care

Soon you’ll have healthy cannabis plants to admire

Supplies Needed

1.) Get Cannabis Seeds

There are a few different ways to get cannabis seeds, with the most common being ordering seeds online and growing seeds you find in weed that you buy. Learn how to research and find the right strain.

Here’s a picture showing several healthy and viable cannabis seeds

2.) Prepare Your Soil or Coco Containers

Before you start germinating your seeds, set up your soil or coco. It will still be a few days until your seedlings arrive, but you want to have everything ready before the seedlings need to be planted.

Get your containers ready before you start germinating

3.) Germination

When it comes to new growers, it seems like the most fool-proof method (at least for me, and many of the new growers who write in) is the Paper Towel Method! It’s so simple, but there’s something about wet paper towels that a young seedling loves Learn About Other Ways to Germinate Seeds.

Paper Towel Method – Place your seeds inside a folded wet paper towel (Important: use cheap brand!)

This method is hard to mess up if you follow the instructions. Place your seeds inside a folded wet paper towel, and put that between two plates. The purpose of the plates is to prevent the seeds from drying out. Don’t let any part of a paper towel hang out the edges or it will wick away all the moisture and dry out. Keep everything totally contained between the plates.

Surprisingly, the really cheap paper towels work the best because the seeds and roots lay on top without getting stuck to anything. This is important. The more expensive “cloth-like” paper towels (like Viva brand) aren’t good for germination because the roots actually grow into them instead of laying on top.

Wet a paper towel (use the cheapest brand you can find). If growing multiple strains, you may want to label the paper towel so you know which is which. Place each seed on the wet paper towel next to their label.

Cover with another wet paper towel

Add another plate on top to keep the paper towels from drying out. Make sure now paper towel is sticking out the sides.

Tips

  1. Check on your seeds every 24 hours but try not to disturb them. When they’ve germinated, you’ll see the seeds have cracked and there are little white roots coming out.
  2. They should germinate in 1-4 days, though some seeds can take 7 days or longer (especially older and smaller seeds).
  3. Keep them warm if possible. Seeds germinate a little faster is to keep them in a warm place (75-80°F). Some people use a seedling heat mat but in most cases that’s unnecessary. I leave mine near a sunny window. I usually put a thermometer in the same place to make sure it’s not too hot or cold (or just check the plate with your hands)

Here are those seedlings about 2 days later. Be extra careful when removing the paper towels. Don’t let the seeds roll around or you won’t know which is which. This is when you’ll be glad you used cheap paper towels, as they are much easier to peel off without disturbing your seedlings.

You can see some of the seeds sprouted, but some of them haven’t yet. That’s totally normal! Each seed is different. If this happens to you, you have two choices. You could plant the ones that have already sprouted and let the other ones stay in the paper towels until they germinate. Or you could just put all the seeds in Rapid Rooters now, and hope for the best as far as the slow-sprouting ones. It’s up to you. Letting the unsprouted seeds stay in the paper towels longer improves the germination rate in my experience, but it’s simpler (easier) to move them all at once.

Seeds often germinate at different rates even if they get the exact same conditions

4.) Place Germinated Seed in a Rapid Rooter

Now it’s time to get your Rapid Rooters! Alternatively, you could place your sprouted seeds directly in the final growing medium (coco or soil). I think these help them get started, but I’ve grown many successful plants by just putting the germinated seed directly in its final home.

Rapid Rooters are nice, but not necessary

The Rapid Rooter should be cut open lengthwise. I use big scissors but you could also use a knife.

Gently place the germinated seed inside, root down. Place the seed close to the surface so it doesn’t have far to go.

If you have a root that is curved or bent, don’t try to straighten it out. Open the Rapid Rooter and lay the germinated seed down gently. It will naturally lay on its flattest side. When you slowly close the Rapid Rooter, the bent parts of the root will end up in the “crack” of the Rapid Rooter that you cut to split it open from the side.

Most seedling plugs will go back into place easily, and you’ll barely be able to tell it’s been opened. I love Rapid Rooters because their texture causes most seeds to stay in place and not “fall down” further into the hole once you’ve got the Rapid Rooter closed.

5.) Water the seedling in the Rapid Rooter until you see a root come out bottom, 1-2 days.

Make sure to always keep the Rapid Rooter moist but not soaking wet and give plain water.

Since your seed has already sprouted and been in placed into the right growing position, it’ll often pop its head out within just 12-24 hours! Sometimes you see just the leaves, but often you actually see the seedling push the shell above ground.

Don’t touch the shell if possible because a tiny tug in the wrong direction can pull the seedling out of the plug and break off the taproot.

Try to let the seedlings break free if possible. But if you have a seedling that’s stuck in a shell after a day or two, and doesn’t seem to be getting any better, you need to go in and help.

I’ve found that pointy tweezers are perfect to pry open a shell that’s stuck. Just close the tweezer, stick it inside between the shell halves, and let it slowly open to pull the shell apart without you ever touching the seedling.

Sometimes a “film” from inside the shell gets stuck on the leaves. If that happens, try putting a drop of water on the film a few times a day to soften it. If the seedling doesn’t push it off on its own, hold the stem between your fingers (so it doesn’t pull at the root) and use tweezers to gently tug at the membrane and release the leaves.

Don’t use a dome on seedlings unless it’s very dry where you live. If you do use a dome, consider keeping a vent open and watching the humidity. A young seedling doesn’t require as high humidity as clones (which are what the domes are designed for), and seedlings tend to get “wet feet” and stop growing as fast in constantly wet conditions.

See also  Afghan widow seeds

Water your seeding in the Rapid Rooters until you see a root coming out the bottom. Keep Rapid Rooters moist but not wet. During this time, give seedlings bright filtered light. A CFL or LED light bulb kept several inches away works well. I’ve left mine on the kitchen table next to a sunny window, and that’s also worked fine for me as long as it doesn’t get too hot.

You should see a root come out the bottom in just a day or two!

After you see your first root, it’s time to…

6.) Put Seedling in its New Home

You are about to water your seedlings for the first time, so prepare your water now.

  • Coco – Prepare water with seedling-strength nutrients, and make sure to pH your water to 5.5-6.5 right before giving it to plants. Unlike soil, coco does not naturally contain any nutrients so you must provide nutrients in the water from the first watering.
  • Soil – Prepare plain water at 6-7 pH. You don’t need to add nutrients for the first 3 weeks or so because your plants will live off what’s in the soil. Adding extra nutrients at this point might overload and burn the seedlings.

Now that your water is ready, dig a hole that’s a little smaller than the Rapid Rooter, and place your seedling plug inside. The idea is to let the Rapid Rooter stick up above the soil a little to help the roots get more oxygen. It’s okay if the plug goes in flat with the soil, but don’t bury the stem as that can cause stem rot in some cases. Even if you’ve got a tall seedling, you usually won’t notice the extra length once the plant is bigger.

Gently pack the nearby soil/coco to hold the Rapid Rooter in place so the seedling is stable.

Your seedlings get a little extra oxygen if you let the Rapid Rooter stick up into the air slightly as opposed to burying it.

Example of cannabis seedlings growing in coco coir, about to get seedling-strength nutrient water. If they were in soil, I would give plain water for the first few weeks.

Water immediately in a small circle around your seedling. For most grow mediums and containers above 1 gallon, you can give 2 cups (500 ml) of water immediately without overloading your seedling. If the grow medium feels moist (for example coco that was recently re-hydrated), give 1 cup (250ml) of water this first watering.

Give 2 cups (500 ml) water in a circle around the seedling. If the grow medium is already wet, give just 1 cup (250 ml)

How to Water Seedlings in the Beginning

Two Main Goals

  • Seedling roots never dry out (most important)
  • Seedling roots aren’t staying soaking wet (roots need oxygen)

Seedlings “drown” and die due to lack of oxygen if they get too much water too often. To avoid this, try to provide an amount of water that lets you water seedlings every few days. Avoid giving so much water that the seedling roots are in a super wet grow medium for days as this causes “damping off” and root problems. Some grow styles like high-frequency fertigation call for watering more frequently. Just remember that the more often you water your plants, the less water you should give at a time. Also, keep in mind that a smaller container tends to dry out fast while a bigger container holds onto the water for longer

Try to maintain a schedule that lets you water your plants every few days without them looking droopy

  • Water in a small circle around the base of the plant at first
  • If the growing medium feels dry within 1 day, give more water next time. Otherwise, give the same amount again next time you water
  • Repeat, until you can give enough water to get at least a little runoff, and have it dry in a few days

If the medium is drying in less than 2 days, it means you need to give more water to the plant at a time, or possibly transplant to a bigger container if the plant has outgrown its current one.

If your growing medium takes longer than 3 days for the top inch to dry, it means the soil is staying wet too long, and plant roots aren’t getting enough oxygen. It also puts your plants at risk of getting fungus gnats . Try giving less water at a time until the plant is drinking more. It’s possible you may have a problem with drainage in your medium ( what is good soil? ) or there are no drainage holes so extra water can’t come out the bottom of the container. Always remove any runoff water instead of letting the plant sit in it.

More seedling resources

Some growers like to put seedlings in solo cups and then into their final container. When done right this can increase the rate of growth by providing more oxygen to the plant’s roots. If you go that route, I recommend paper cups as they’re not as bad for the environment.

Autopsy: Why Aren’t My Marijuana Seeds Sprouting?

If your seeds still aren’t sprouting and growing properly, consider the following factors.

If there’s no germination at all…

  • Temperature may be too hot or cold – aim for 75-80°F
  • Too wet – seeds and seedling roots should always be moist, but should not be soaking wet
  • Too dry – if a root dries out the seedling can die
  • Bad seeds – It might not be you, it could be the seeds themselves. Even if you purchase from a good breeder, sometimes you still get duds. How can I tell if seeds are viable?

If seeds sprout, but then stop growing…

  • Temperature is too hot or cold – aim for 75-80°F
  • Too wet – new seedlings don’t like “wet feet” so make sure your Rapid Rooter or growing medium never looks shiny or muddy, as that means there’s too much water! For this reason, it’s also usually recommended to avoid using a humidity dome with seedlings unless your air is dry. Although clones love humidity domes (they need water from the air because they don’t have any roots to get water), seedlings like it a little drier or roots tend to get mushy.
  • Too dry – less common unless you live in a very dry area, but sometimes your medium dries out too fast if you’ve got a heavy-drinking, fast-growing seedling!
  • Too much light – if the seedlings get blasted with high levels of light right away, it can shock them. They may need some time to adjust to higher light levels. Simply starting your grow light a little further away than normal is usually enough. Think sunny window at first, and start ramping up after a week of healthy growth.
  • Not enough light – if seedlings are growing long and stretchy without growing new sets of leaves, it means it wants more light.
  • No light for more than a day – if the sprouted seed doesn’t get light within 24 hours after sprouting, it may die. Once seeds are sprouted, get them in a Rapid Rooter and under at least some amount of light as soon as possible!
  • Roots damaged – If somehow your roots got damaged, it can sometimes stop the seedling from growing

Unfortunately, sometimes you will never know why certain seeds just don’t thrive. It’s all part of nature. But if you follow this tutorial you will get the best results possible.

How To Quickly And Successfully Germinate Cannabis Seeds

All cannabis plants, whether tall and lanky Sativa trees or compact and sturdy Indica bushes, start from a single weed seed. This tiny brown nut contains everything necessary to eventually yield hundreds or even thousands of grams of potent buds! However, to reach that point, it’s important to place the seed in a special environment that will trigger life inside it, crack the shell open, and let the roots and stalk out.

In this article, we’ll be explaining how to germinate cannabis seeds and tell you about the best ways to do it. Before we start though, it’s important to know what environment cannabis seeds are most likely to pop in. Since in nature, they germinate in spring, logically, you want to put them in conditions that mimic fertile ground in spring – think plenty of moisture, little light, and mildly warm temperatures of around 18-22 C (64-71 F). Now, you’re ready to learn about the best ways to germinate cannabis seeds. Let’s dive right in!

Main Methods Of Cannabis Seed Germination

The following three methods have proved to be some of the easiest as well as the most effective. This means each of them is a great way to help your cannabis seed to sprout.

Germinating Cannabis Seeds In Soil

When spread naturally, marijuana seeds germinate directly in soil. So, why not recreate the natural process? This method is great for beginners because of how few steps it requires. All you need to do is make a 1.5-2cm (0.5-1 inch)-deep hole in the soil, place your seed in it, and lightly cover it with more soil. Then, water the spot above the seed and keep an eye on it to make sure the area stays moist most of the time. It’s also a good idea to cover your starting pot loosely with a plastic bag or a wrap to keep the environment humid and warm until the seedling shows up from the soil. This method is preferred by many because it eliminates the stress of transplantation that, at times, can be too tough on fragile seedlings.

Cannabis Strains For Beginners

Germinating Weed Seeds In Water

If you’re not ready to get your hands dirty just yet, it’s fine! Some growers start their seeds in a glass of water. This method is easy and quite effective. Practice shows that germinating in water normally makes around 90% of weed seeds pop. This method is pretty self-explanatory – all you need to do is place your cannabis seeds in a glass of fresh water away from light. Usually, the nuts crack open on the second day. For older seeds, however, the process may take up to 7 days, which is also fine. After the taproot shows, the seed is ready to be planted. Some growers wait for the seeds to drown (about 24 hours in), then transfer them to a wet paper towel – the method we’ll be explaining next.

See also  Cannabis seeds rubicon

How To Germinate Marijuana Seeds In A Paper Towel

This next method is a true classic that’s been shared grower to grower for generations. It’s also pretty simple and has everything you need to maintain the perfect environment for cannabis seeds to pop. To use this method of germination, place your seeds on a clean paper towel, fold it over them, and spray the towel lightly with water. After that, put the moist towel on one plate and cover it with a second plate to keep the seeds in the dark and not let the moisture evaporate. That’s pretty much it! This method can also be modified and improved upon. For example, instead of a paper towel, you can use two cotton pads for each of the seeds – these will be easier to open when it comes to removing the seed. Instead of plates, you can also place your seeds in an airtight container or ziplock bag to ensure the moisture stays in the towel/cotton pads.

Easy-To-Grow Cannabis Strains

How To Germinate Cannabis Seeds In Cotton Wool

Start with making a layer of cotton wool moist but not dripping wet, so that the excess water won’t suffocate the seeds. Then place your seeds on top, cover them with another layer (also moist), and put everything in a dark place.

Make sure the cotton wool is covered and won’t dry out while the seeds germinate.

The difficulty with germinating cannabis seeds in cotton wool is that the emerging roots may get entangled in it. For this reason, it’s better to use cotton pads in which cotton is more compacted and there is less fiber sticking out.

How To Germinate Autoflower Seeds

Cannabis is cannabis, and germinating autoflower seeds is exactly the same as any other variety. Just make sure to use the most effective technique because with autos you don’t want to lose any time at any stage, including germination.

Also, autoflower growers often choose the straight-into-the-final-pot method of germination to spare their precious babies any shock of transplanting.

Alternative Methods Of Cannabis Seeds’ Germination

Now let’s move to the more modern methods of cannabis seeds germination. These aren’t necessarily better in terms of germination rate, but still have some pros as well as cons that we find important to explain.

Germinating Cannabis Seeds In Peat Pellets Or Starter Cubes

If you want to give your seeds special treatment and make them feel loved from the very first day in your grow op, you might want to get your hands on peat pellets or starter cubes. So, how do you germinate marijuana seeds in rapid rooters, peat pellets, and starter cubes? These are all individual plugs of peat or a special seed starter mix that are incredibly easy to use and don’t leave much room for error. In the case of peat pellets (you may also know them as jiffy pellets), all you need to do is soak them in warm water, which will make the pellets expand. Then, squeeze the excess moisture out and place your seed (pointy side down) inside the pellet. Starter cubes and rapid rooters don’t require squeezing, but whatever you choose, you need to make sure your medium is slightly moist at all times. One of the greatest advantages of this method is that the seed germinates in complete peace and doesn’t need to be transferred from the pellet/starter cube/rapid rooter. After the seedling is out, just plant it into the soil together with what you were germinating the seed in.

Fast Flowering Cannabis Seeds

If you’re wondering how to germinate marijuana seeds for hydroponics, peat pellets, unlike other methods from this article, aren’t suitable for hydroponic setups. However, the rest of the techniques we’ll be discussing can be used for both soil and soilless media.

Germinating Cannabis Seeds In Rockwool Cubes

If you’re growing your seeds in a hydroponic setup, you might want to look into rockwool cubes for germination. As a material, rockwool is inert, cheap, and easy to find. Fans of hydroponic grows often choose rockwool for its mold-resistant qualities. The process of germination in rockwool cubes is the same as described in the previous method: simply place a seed inside a cube, water it, and keep it moist until the seedling is out.

Even though many growers prefer using rockwool for germination of their cannabis seeds, this method has quite a few drawbacks. First of all, the pH of new rockwool is not suited for cannabis seeds. It’s far too high and needs to be lowered before use. That’s why rockwool requires soaking overnight in pH-ed water and properly rinsed afterward. The second drawback of using rockwool for germination is that it’s a synthetic material that’s bad for both your health and the environment. When working with rockwool, it’s advised to use gloves and protective masks, because little pieces of the material can easily get into your mouth, eyes, and even end up in your lungs. Lastly, germination rates for seeds placed in rockwool cubes aren’t that great either – you can wait for your seeds to pop for weeks without any result.

Cannabis seed germination methods comparison table

In this article, we’ve covered five main germination methods. To sum everything up, here’s a comparison chart that can help you decide on how to germinate your marijuana seeds.

How To Germinate Cannabis Seeds For Hydroponics

DWC systems have seen a huge rise in popularity among home growers, making the question of germinating cannabis seeds for hydroponics extremely relevant. Is it any different? Not really, because the basics stay the same. You can still start with the paper towel method or a glass of water. However, we suggest using either starter cubes or rockwool when germinating cannabis seeds for hydroponics, as this will take the risk of damaging the sprouts to the minimum.

Here’s what you’ll need to do:

  • Soak your starter cubes or rockwool pieces in clean, pH-neutral water for an hour.
  • Place a seed inside the cube.
  • Put the starter cubes/rockwool cubes with seeds in them inside the grow tray.
  • Fill the bottom of the grow tray with an inch (2.5cm) of clean water or a very light nutrient solution.
  • Dial in the temperature (20-30C/69-89F) and humidity levels (80-90%).
  • Keep the lid on for conditions close to a greenhouse.

That’s it! After a couple of days, you’ll see your sprouts emerging.

How Long Does It Take For Marijuana Seeds To Germinate?

Your preferred method won’t make much difference in how long it takes for marijuana seeds to germinate. What actually matters when it comes to germinating cannabis seeds quickly is the quality of the seeds, their genetics, and how old they are. Normally, fresh seeds of good quality will never take more than 5 days to show taproot. However, if your seeds have been waiting for their hour for a little too long, it may take them around 10 days to germinate. Luckily, this won’t affect any characteristics of the future plant.

How To Germinate Old Cannabis Seeds

There are several tricks for germinating old cannabis seeds, all of them aimed at making the shell softer or thinner to help the sprout break out:

  • Germinating cannabis seeds with hydrogen peroxide. Before germinating old cannabis seeds, try soaking them in a glass of room-temperature water with a teaspoon of hydrogen peroxide mixed in. This solution will help rehydrate and soften the seed’s shell. After 24 hours in this solution, switch to your preferred germination method.
  • Scarifying old seeds. This is another proven method of germinating old cannabis seeds. Try lining a small matchbox with sandpaper, placing the seeds in, and shaking them there for about a minute. This will cover the seeds in microfractures, making it much easier for the sprout to break through. After scarifying the seeds, use your preferred germination method.

Tips For Caring After Germinating Seeds And Seedlings

As we’ve already pointed out, cannabis seedlings are very gentle, and you need to be careful not to put them in any danger or stress. Use the following tips, and your seedlings will make it safely to the next stage of their lifecycle.

Start Indoors

In order to germinate and survive the first days of life, cannabis seeds and seedlings need to be kept under certain conditions like warm temperature, high levels of humidity, darkness for seeds/lots of light for seedlings, and, of course, peace and quiet. Outdoor environments can therefore be too unpredictable – if the weather changes and brings heavy rain or wind, or if a bird or cat decides to try and snack on the seedling, the young plant most likely won’t survive and you’ll have to start all over. That’s why we recommend germinating your seeds and growing seedlings indoors, where you have full control over their environment.

Choose Soil For Seedlings Wisely

There’s a common term among growers used to describe soil extremely rich in nutrients, and that’s “hot”. While hot soil is beneficial for cannabis in general, especially when made and used correctly, hot nutrient-rich soils, or super soils, are not the best option for young marijuana seedlings. In the early stages of cannabis development, the plant’s nutrient needs are quite low, and too much of them can actually hurt the young plant’s health. So, make sure to use more neutral soil for seedlings. A good trick that you can implement in your practice is to cover nutrient-rich soils with a layer of a more neutral medium and plant the seedling in this upper layer. The plant will develop, and once it’s ready for bigger nutrient intake, its roots will reach the underlying “hotter” soil. Remember that the vegetative stage requires nitrogen-rich media.

Give Seedlings Enough Light

After spending so much time inside its dark shell, seedlings are hungry for light, and plenty of it! As we suggest starting your plants indoors, this means you’ll need to install a light to satisfy the seedlings’ needs. The vegetative stage of cannabis requires mostly blue light spectrum, so anything from fluorescent lamps to full-spectrum LEDs, 100W and up, will work fine for seedlings. Just make sure the light is placed close enough to the plants. The optimal distance for fluorescent lights is 5-6 inches (13-16cm) and 8-12 inches (20-30cm) for LEDs. In case the seedlings need more light, they will let you know by getting tall and leggy. This condition is dangerous for them, so make sure your baby plants are receiving enough light.

See also  Order cannabis seeds uk

Keep Them In A Mini-Greenhouse

Finally, another nice touch to keep your sprouts safe and sound would be to provide them with a small improvised greenhouse of their own. Loosely covering the starting pots or pellets with a plastic bag will do the trick. However, in garden stores, you can also find specialized containers with tall transparent lids. Whatever you choose, this will help the seedlings stay warm, hydrated, and safe from any dangers of the outside world.

Is It Legal To Germinate Cannabis Seeds?

This is a tricky question to answer, as the situation depends on the jurisdiction of your country of residence.

If you’re a citizen of Canada, the U.S., the Netherlands, or Spain – all countries with lighter cannabis policies – it’s legal to germinate cannabis seeds. However, additional rules apply depending on what part of the country you live in and what seed type you want to germinate. Nonetheless, it’s safe to assume that germination of cannabis seeds is legal everywhere where it’s legal to grow cannabis, and especially if you’re planning to start a garden of medicinal marijuana, you likely won’t break any rules by germinating seeds of strains with THC content lower than 1%.

In other countries, governments may draw the line at germination. For example, in the UK, it’s legal to trade and keep cannabis seeds, but you have to be careful with their germination, as this is where the law gets broken.

In our blog, we’ve covered the legality of cannabis seeds and everything you can do to stay safe. For more information, check out the following articles:

  • “Where in the World Is It Legal To Buy Cannabis Seeds?” for tips for residents of Europe, China, South Africa, New Zealand, Turkey, and more.
  • “The Legality Of Cannabis And Its Seeds In The UK”
  • “Is It Legal to Buy Cannabis Seeds in the USA?”
  • “Canada Pot Laws”

What’s the best temperature for germinating cannabis seeds?

Cannabis seeds prefer a warm environment for germination, with the most optimal temperature being 25C (78F). However, it’s okay to add/subtract a couple of degrees from this number while still keeping the air warm.

What’s the best pH for germinating cannabis seeds?

The perfect pH for cannabis seed germination is between 5.5-6.0.

What’s the best soil for germinating cannabis seeds?

It’s better to use light, easily drainable soil for germinating seeds, as this will not restrain the growing sprout. The soil for germination and seedlings should also be neutral or very light on nutrients – “hot” and nutrient-rich soils are only suitable for mature cannabis plants.

What’s the best humidity level for germinating cannabis seeds?

The germination stage requires high humidity levels of 80-90%.

What’s the fastest way to germinate cannabis seeds?

All methods described in this article are more or less the same in terms of the speed of germination. Much more depends on the freshness of your seeds – the fresher the seeds, the sooner they will germinate.

Do weed seeds need light to germinate?

Weed seeds germinate in the dark. So, even after you put a germinated seed in soil, you can keep the lights off. Until the seed pops up through the surface, that is.

Will cracked seeds germinate?

The protective shell on seeds is there for a reason, so any cracks or chips decrease the chances of successful germination. However, much depends on how long ago the crack appeared. And, anyway, it never hurts to try.

How long for cannabis seeds to break soil?

If you put a dry seed into wet soil, don’t expect the sprout to appear sooner than 60 hours. For pre-soaked beans or those that were put into the soil when they had shown a taproot, this may happen earlier. Sometimes in as little as 12 hours.

Cannabis seeds sold in reputable seed shops sprout very fast. Seeds that are old or have been stored improperly may take up to 10 days to sprout.

Starting Off Right

Now you can see that growing marijuana from seed isn’t at all that hard. Just remember to give your seeds enough TLC and dial in some environmental conditions to fit their needs. We’ve shown you some of the easiest and most effective methods of germinating pot seeds. Which one is your personal favorite? Let us and fellow growers know in the comments below.

Herbies Head Shop expressly refuses to support the use, production, or supply of illegal substances. For more details read our Legal Disclaimer.

I’m trying my first seeds using the glass of water method, some seeds have sunk to the bottom and some are floating, are the floating ones no good?

If you lightly “tap” the floaters after they’ve soaked overnight, they’ll sink, they just weren’t heavy enough to break the surface. If they float back up, let them soak another day and tap it. If it still floats, you may have an issue. However, I’ve experienced floaters and after the overnight soak, every floater I needed to tap, sank, and germinated fine.

I used a cotton pad, wet in clear container w/ saran wrap over put in sunlight and after first day checked every 12hrs, and they cracked on the 2nd day. worked well

Hello Keepinit, we are happy to hear that our article is useful to the growers, we wish you best of luck in your hobby!

what i find the most effective way is placing in a coffee filter then putting a coffee filter on top, then put on a plate and place a cup over the seeds and coffee filters and keep moist until germination occurs

What’s the longest you’ve ever had to wait for a seed to germinate and still had a normal, healthy plant? I’ve had 100% success the last 4 strains I’ve germ’ed with seedlings showing in 3-5 days. Recently got 10 Northern Lights seeds from a local vendor, and the first three went 15 days and nothing. I retried with two more and I’m on day 8 and still nothing. Maybe just a bad batch of seeds.. I’m behind schedule now for my next grow!

most good and healthy seeds sprout after a couple days, some older seeds take longer. I usually give them a couple of days to germinate if i still see no signs after 5-6 days i start to get worried.

15 days is a lot. I’ve waited a week at most, longer than that u will see the seed get darker, kinda sluggish nd swelled, that’s a dead seed decomposing, sometimes they just flood

How’s it going? I’m new to the game and was wondering the best way of altering PH level of water? I have an abundance of 500ml bottled water that has a PH of 7.9, a good way off the optimal PH 6 required I know, but is there a way of adding solution to each bottle separately and if so any suggestions of best solution to use? Thanks.

Yes there is ph tester for water that takes drops to test which is the most efficient way to test ph. Also to adjust the ph you want to get ph-up or ph- down I believe general hydroponics is the company for it.

The pic at the top is wrong ,the seed is up side down pistols or the hairs should come out of the seed butt hole that’s how the pollen gets in .2 hairs pair seed one for seed the other for the food sac ,

What happens to Seeds overtime they dry out and the carbohydrate that’s inside of them to feed them becomes weaker. As far as the potency of genetics that does not change however I recommend soaking all Seed between 12 and 24 hours. I use of seed starter MassiveGro invented formula pH to round 5.8 I pour about a quarter inch in a cup put my seeds in there put the next couple on top of it to force them down into the liquid. Occasionally give them a shake you don’t want them to be floating when you plant them. Then I soak my paper towel are use the nice cotton felt like paper towels I think a Brauny or veva with that seed starter formula pour the seed right onto it a ring out the excess moisture put it in a 1 gallon freezer bag place bag up high where it is 80° or put it on the heat mat with a thermostat and check it after one day because it’ll sprout fast. I like to let the sprout get a half inch long and then plant it The biggest problem you have with old seed is the lack of carbohydrate it may sprout then usually burn up all it has and die right away. Unless your seeds got hot you probably won’t have any problem unless they’re more than four years old. Old seed you can assist the carbohydrate by watering the soil with potato water a few drops of corn syrup or a fish fertilizer soak and Endo Mycorrhiza sprinkled around the seed. NPK industries wrong line of Omina is a good gentle amino acid helps break down substances so plants uptake faster when everything’s good I usually mix half strength of the weak dosage. NPK raw stuff can be bought on Amazon in small 2 ounce packages there everything’s pretty concentrated usually last you quite a while. But This is where a seed starter formula comes in because it usually has the carbohydrate to keep it going right away. I use pro mix BX with added perlite and when plants are tiny etc. I always measure my water and times with measuring spoons till a plant is healthy pro mix keeps plants from damning off as long as you’re not drenching it right away because it doesn’t dry out very fast easiest way to kill seeds to drowned it that’s why I measure watering and write it down I don’t try to push or stress my plants I either used seed starter fertilizer or plain pH water until they are about 6 inches high before a poor nutrients to them and once a week I do a full soil drench and drain prior to that you’re probably talking tablespoon or two of Water. Never let your pH get above 6.4 you lock out nutrients and you also root slower, once your plants are growing an strong between the 6 inch and 12 inch stage I’ll use about two weeks of red light will actually give you more roots. You can go to in NPK-University.com sign up for Harley Smith’s advanced grow you won’t be sorry Harley is like the master of the world lol